{ "_hint": "Send this WHOLE reply back (for example on the bridge\u0027s wiki issue): each row is one verb or one modelling op on your install, with the error SOLIDWORKS gave when it failed. level:\"read\" changed nothing; level:\"write\" built, exported, saved and closed a scratch part in the bridge\u0027s own scratch folder and re-activated the document that was active before.", "_timeoutHint": "ab waits up to 1500s for this verb before the request times out. If it\u0027s a long operation (cloud open / download / export), DON\u0027T treat a timeout as failure — the work usually keeps running on the bridge. Poll `swx_status` until it reports done.", "bridgeVersion": "0.10.9", "comRespawn": { "error": null, "freedMb": 0, "gracefulExit": true, "respawned": true, "solidworksPrivateMbAfter": 5333, "solidworksPrivateMbBefore": 5333 }, "complete": true, "documentsCreated": 12, "durationMs": 440078, "error": "", "jobId": "3d41d928fcd642c6", "jobState": "completed", "level": "write", "liveMeasured": { "measuredVariants": 40, "note": "A step\u0027s `proven.live` is true only when every variant it exercised was measured on this SOLIDWORKS release. A variant not listed has never been built live.", "source": "docs/LIVE-RESULTS.md", "unmeasuredVariants": 20, "variants": [ { "checks": "every check", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "new_part", "what": "a new part document" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "new_assembly", "what": "a new assembly document" }, { "checks": "creation worked live (0.10.6); its modelling failed, so scripts now refuse it (document_hidden)", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "new_part.invisible", "what": "a new part created HIDDEN (DocumentVisible false around NewDocument) — it CANNOT be modelled: a hidden document cannot be activated, and every modelling op selects (measured 2026-10-14)" }, { "checks": "not run live", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "new_assembly.invisible", "what": "a new assembly created HIDDEN (cannot be modelled, as new_part.invisible)" }, { "checks": "12 reused builds (reuseDocument), 2026-10-14", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.6", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "clear_part", "what": "every feature after the origin deleted from the bridge\u0027s own part (DeleteSelection2), so one document serves a whole battery" }, { "checks": "T01 T03 T10 T14 T27", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.plane.front", "what": "a sketch on Front Plane" }, { "checks": "T02 T13 T24 T30", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.plane.top", "what": "a sketch on Top Plane" }, { "checks": "T35", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.plane.right", "what": "a sketch on Right Plane (sketch +x = model −Z, +y = model +Y; a boss goes +X)" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.plane.named", "what": "a sketch on a named plane other than Front/Top/Right" }, { "checks": "T04 T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.offset.top.positive", "what": "a sketch on a plane offset + from Top Plane" }, { "checks": "T05 T26", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.offset.top.negative", "what": "a sketch on a plane offset − from Top Plane (keeps Top Plane\u0027s axes)" }, { "checks": "T38", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.offset.front.positive", "what": "a sketch on a plane offset + from Front Plane" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.offset.front.negative", "what": "a sketch on a plane offset − from Front Plane" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.offset.right.positive", "what": "a sketch on a plane offset + from Right Plane" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.offset.right.negative", "what": "a sketch on a plane offset − from Right Plane" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.offset.named", "what": "a sketch on a plane offset from a named plane" }, { "checks": "T06 T20 T21 T28 T32 T39", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.face.top.positive", "what": "a sketch on a face facing +Y (a top face), picked by a point" }, { "checks": "T25", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.face.top.negative", "what": "a sketch on a face facing −Y (a bottom face, hidden in an iso view)" }, { "checks": "T36", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.face.right.positive", "what": "a sketch on a face facing +X (keeps Right Plane\u0027s axes, the origin projected)" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.face.right.negative", "what": "a sketch on a face facing −X" }, { "checks": "T37", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.face.front.negative", "what": "a sketch on a face facing −Z (keeps Front Plane\u0027s axes, the origin projected)" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "sketch.face.front.positive", "what": "a sketch on a face facing +Z" }, { "checks": "T01 T02 T03", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.rect", "what": "a rectangle (corner or center anchor)" }, { "checks": "T04 T06 T30", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.circle", "what": "a circle" }, { "checks": "T13 T14 T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "sketch.multiProfile", "what": "several profiles in one sketch (a ring, disjoint rectangles, the LEGO tubes)" }, { "checks": "T01 T06 T25 and every base block", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "extrude.one", "what": "a boss one way (the plane\u0027s normal, or outward from a face)" }, { "checks": "T33", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "extrude.one.reversed", "what": "a boss whose direction flag is reversed (reverse:true: from Top Plane it goes −Y)" }, { "checks": "T10", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "extrude.both", "what": "a boss both ways (depthMm and depth2Mm)" }, { "checks": "T11", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "extrude.midPlane", "what": "a boss symmetric about the sketch plane" }, { "checks": "T34", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "extrude.one.throughAll", "what": "a boss through all, one way" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "extrude.both.throughAll", "what": "a boss through all, both ways" }, { "checks": "T07 (nothing on that side: the step failed, as it must) and T27\u0027s first direction", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "cut.one", "what": "a cut one way, the default direction (the plane\u0027s −normal, into a face)" }, { "checks": "T08 T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "cut.one.reversed", "what": "a cut one way, reversed (reverse:true)" }, { "checks": "T09", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "cut.one.throughAll.reversed", "what": "a cut through all, reversed" }, { "checks": "T27", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "cut.both", "what": "a cut both ways (depthMm along the cut\u0027s own direction, depth2Mm the other)" }, { "checks": "T12", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "cut.midPlane", "what": "a cut symmetric about the sketch plane" }, { "checks": "11 of 11 live selections (T06 T16-T21 T25 T28-T30)", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "select.multiSelectTyped", "what": "the picked entities selected by MultiSelect2 with a typed object array" }, { "checks": "never needed live: the first rung worked", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "select.entitySelect4", "what": "a picked entity selected by IEntity::Select4 (the ladder\u0027s 2nd rung)" }, { "checks": "never needed live: the first rung worked", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "select.selectByRay", "what": "a picked entity selected by SelectByRay (the ladder\u0027s 3rd rung)" }, { "checks": "never needed live: the first rung worked", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "select.selectByIdAtPoint", "what": "a picked entity selected by SelectByID2 at the point, through the view (the last rung)" }, { "checks": "T17 T30", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "fillet.allOfFeature", "what": "a fillet on every edge of a feature (a box\u0027s 12, a cylinder\u0027s 2)" }, { "checks": "T32 (swx_selftest)", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "fillet.atPoints", "what": "a fillet on edges picked by points" }, { "checks": "T17 T30 T32", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "fillet.FeatureFillet3", "what": "the fillet made by IFeatureManager::FeatureFillet3" }, { "checks": "never needed live: FeatureFillet3 worked", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "fillet.createDefinition", "what": "the fillet made by the CreateDefinition(swFmFillet) fallback" }, { "checks": "T18", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "chamfer.atPoints", "what": "a chamfer on edges picked by points" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "chamfer.allOfFeature", "what": "a chamfer on every edge of a feature" }, { "checks": "T19 T29", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "shell.inward", "what": "a shell inward, removing faces picked by points (the top face, and the bottom face hidden in an iso view)" }, { "checks": "T42", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "shell.outward", "what": "a shell outward (the original block becomes the cavity)" }, { "checks": "T20 T28", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "linear_pattern.x", "what": "a linear pattern along X, one direction (positive or negative spacing)" }, { "checks": "T39", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.4", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "linear_pattern.x+z", "what": "a linear pattern in two directions, X and Z (positive and negative spacing)" }, { "checks": "T21", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "circular_pattern.y", "what": "a circular pattern about Y" }, { "checks": "T15 T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "set_appearance.part", "what": "a colour on the part (or on the one body of a single-body part)" }, { "checks": "T16", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "set_appearance.face", "what": "a colour on one face picked by a point" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "set_appearance.body", "what": "a colour on one body of a multi-body part" }, { "checks": "T22 T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "set_material", "what": "a material from the SOLIDWORKS library (the body\u0027s density follows it)" }, { "checks": "T31 (swx_selftest)", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "set_material.reappliesAppearance", "what": "a material after a colour: the bridge re-applies the colour" }, { "checks": "T24", "liveOnThisInstall": false, "measuredOn": [ { "bridge": "0.10.3", "date": "2026-10-14", "edition": "connected", "major": 34, "solidworks": 2026 } ], "variant": "set_prop", "what": "a custom property" }, { "checks": "not in the live battery (swx_save_as, the verb, is)", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "save_as", "what": "save_as as a script step" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "rebuild", "what": "rebuild as a script step" }, { "checks": "not in the live battery", "liveOnThisInstall": false, "measuredOn": [ ], "variant": "zoom_fit", "what": "zoom_fit as a script step" } ] }, "memory": { "commitAvailableMb": 33328, "commitLimitMb": 71632, "commitUsedMb": 38304, "commitUsedPercent": 53.5, "physicalAvailableMb": 34859, "physicalTotalMb": 64976, "pressure": "ok", "pressureWhy": [ ], "readOnly": "Facts, read-only. The bridge never closes, stops or kills a process that is not SOLIDWORKS, whatever it holds — report the largest holders to the user and let them decide. The only memory the bridge returns itself is a SOLIDWORKS session it started, with no documents open (swx_stop, then swx_start).", "rule": "critical: commit available under 8 % of the limit or under 4 GB; high: under 15 %, or SOLIDWORKS over sessionBudgetMb (SWX_SW_MEMORY_BUDGET_MB). Verbs that create or load geometry are refused at critical (low_commit_memory).", "sessionBudgetMb": 6144, "sessionBudgetSource": "default", "solidworks": { "handles": 2836, "overBudget": false, "pid": 31000, "privateMb": 5333 } }, "memoryPressureSeen": [ ], "recycled": [ ], "results": [ { "detail": { "classicYears": [ 2021 ], "edition": "desktop", "launchRoute": "com", "registryVersions": [ "SOLIDWORKS 2021", "SOLIDWORKS CAM" ], "registryYears": [ 2021 ], "versionSupport": { "lacks": [ ], "majorVersion": 29, "revision": "29.5.1", "supported": true, "supportedFrom": 2021, "tested": false, "testedOn": [ 2026 ], "year": 2021 } }, "ms": 272, "name": "status", "pass": true, "verb": "swx_status" }, { "ms": 6, "name": "readiness", "pass": true, "verb": "swx_readiness" }, { "ms": 142, "name": "document list", "pass": true, "verb": "swx_docs" }, { "ms": 234, "name": "preferences", "pass": true, "verb": "swx_get_preferences" }, { "ms": 281, "name": "active document info", "pass": true, "verb": "swx_document_info" }, { "ms": 700, "name": "design info", "pass": true, "verb": "swx_design_info" }, { "ms": 731, "name": "parameters", "pass": true, "verb": "swx_get_parameters" }, { "ms": 257, "name": "custom properties", "pass": true, "verb": "swx_props_get" }, { "ms": 268, "name": "mass properties", "pass": true, "verb": "swx_mass_properties" }, { "ms": 320, "name": "bodies", "pass": true, "verb": "swx_inspect_bodies" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 20.0, 5.0 ], "min": [ 0.0, 0.0, 0.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 20.0, 5.0 ], "min": [ 0.0, 0.0, 0.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.008000000000000002, "volumeMm3": 1000.0 }, "ms": 4166, "name": "T01 rectangle anchor: xMm/yMm is the CORNER by default", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5244, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 5.0, 0.0 ], "min": [ 0.0, 0.0, -20.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 5.0, 0.0 ], "min": [ 0.0, 0.0, -20.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.008000000000000002, "volumeMm3": 1000.0 }, "ms": 4812, "name": "T02 Top Plane: sketch +Y is model -Z", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5067, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 5.0, 10.0, 5.0 ], "min": [ -5.0, -10.0, 0.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 10.0, 5.0 ], "min": [ -5.0, -10.0, 0.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.008000000000000002, "volumeMm3": 1000.0 }, "ms": 5040, "name": "T03 anchor center", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5067, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4392.6990816987245, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 8 ], "massKg": 0.0351415926535898, "volumeMm3": 4392.699 }, "ms": 6699, "name": "T04 sketch on a plane offset +10 mm from Top Plane", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5654, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, -5.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 6000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, -5.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 6 ], "massKg": 0.047999999999999994, "volumeMm3": 6000.0 }, "ms": 7984, "name": "T05 sketch on a NEGATIVE offset plane (-5 mm)", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5655, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 14.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4113.097335529233, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 14.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 7999.999999999999, "faceCount": [ 8 ], "massKg": 0.03290477868423386, "volumeMm3": 4113.097 }, "ms": 6212, "name": "T06 sketch on a FACE picked by a point (the top face)", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5656, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": true, "volumeMm3": null, "zSpanMm": null }, "fails": [ ], "measured": { "error": "step 5 (cut) failed: SOLIDWORKS made no cut (the feature came back null) — nothing was removed. A cut goes along its plane\u0027s −NORMAL (measured: a cut from Top Plane removes −Y) and INTO a face it is sketched on; if the material is on the other side, pass reverse:true, or direction:\"both\" / midPlane:true" }, "ms": 6183, "name": "T07 a default cut from Top Plane with the body on +Y fails LOUDLY, never silently", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5596, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 3500.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 11 ], "massKg": 0.028000000000000004, "volumeMm3": 3500.0 }, "ms": 6402, "name": "T08 cut reverse:true removes material on +Y", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5598, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 3000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 10 ], "massKg": 0.02400000000000001, "volumeMm3": 3000.0 }, "ms": 6170, "name": "T09 cut throughAll + reverse", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5600, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 800.0, "zSpanMm": 8.0 }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 5.0, 5.0 ], "min": [ -5.0, -5.0, -3.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 6 ], "massKg": 0.0064, "volumeMm3": 800.0 }, "ms": 6368, "name": "T10 extrude direction both (5 mm one way, 3 mm the other)", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5600, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 5.0, 5.0, 5.0 ], "min": [ -5.0, -5.0, -5.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 5.0, 5.0 ], "min": [ -5.0, -5.0, -5.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.008000000000000002, "volumeMm3": 1000.0 }, "ms": 6132, "name": "T11 extrude midPlane", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5600, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 3904.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 12 ], "massKg": 0.03123199999999999, "volumeMm3": 3904.0 }, "ms": 7395, "name": "T12 cut midPlane through the block", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5600, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": 1, "densityKgM3": null, "faceCount": 4, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 502.65482457436696, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 10.0, 5.0 ], "min": [ -5.0, 0.0, -5.0 ] }, "bodyCount": 1, "densityKgM3": 7999.999999999999, "faceCount": [ 4 ], "massKg": 0.004021238596594936, "volumeMm3": 502.655 }, "ms": 6902, "name": "T13 two concentric circles in ONE sketch extrude as a RING", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5600, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": 2, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 250.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 15.0, 5.0, 5.0 ], "min": [ 0.0, 0.0, 0.0 ] }, "bodyCount": 2, "densityKgM3": 7999.999999999999, "faceCount": [ 6, 6 ], "massKg": 0.002, "volumeMm3": 250.0 }, "ms": 6562, "name": "T14 two disjoint rectangles in ONE sketch: one feature, two bodies", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5604, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": [ 200, 0, 0 ], "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 200, 0, 0 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.03200000000000001, "volumeMm3": 4000.0 }, "ms": 7895, "name": "T15 set_appearance on the part", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5827, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 6 ], "massKg": 0.03200000000000001, "volumeMm3": 4000.0 }, "ms": 8031, "name": "T16 set_appearance on one face picked by a point", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5842, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 3958.4188669627374, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 26 ], "massKg": 0.031667350935701916, "volumeMm3": 3958.419 }, "ms": 9639, "name": "T17 fillet every edge of the block, r = 1 (allOfFeature)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5804, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 3990.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 7999.999999999999, "faceCount": [ 7 ], "massKg": 0.031920000000000004, "volumeMm3": 3990.0 }, "ms": 6514, "name": "T18 chamfer ONE edge picked by a point, 1 mm", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5582, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1084.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 11 ], "massKg": 0.008672000000000006, "volumeMm3": 1084.0 }, "ms": 6449, "name": "T19 shell 1 mm, top face removed", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5583, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4188.495559215387, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 12 ], "massKg": 0.03350796447372311, "volumeMm3": 4188.496 }, "ms": 11299, "name": "T20 linear pattern: one boss -\u003e 3 along X, 6 mm apart", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5772, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4169.6460032938485, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 14.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 18 ], "massKg": 0.03335716802635079, "volumeMm3": 4169.646 }, "ms": 11066, "name": "T21 circular pattern: one boss -\u003e 6 around Y", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5825, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": 1020.0, "faceCount": null, "features": null, "massKg": 0.004079999999999999, "mustFailOrRemoveMaterial": false, "volumeMm3": 4000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 198, 193, 188 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 1020.0, "faceCount": [ 6 ], "massKg": 0.00408, "volumeMm3": 4000.0 }, "ms": 8608, "name": "T22 issue #2: body mass uses the material\u0027s density (ABS 1020 kg/m^3)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5834, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, -3.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4084.823001646924, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, -3.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.000000000001, "faceCount": [ 8 ], "massKg": 0.0326785840131754, "volumeMm3": 4084.823 }, "ms": 7611, "name": "T25 sketch on the BOTTOM face (hidden in an iso view, normal -Y) extrudes OUTWARD", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5660, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": [ { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, { "max": [ 4.0, -3.0, 0.0 ], "min": [ 0.0, -5.0, -6.0 ] } ], "bodyCount": 2, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4048.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, -5.0, -10.0 ] }, "bodyCount": 2, "densityKgM3": 8000.000000000001, "faceCount": [ 6, 6 ], "massKg": 0.03238400000000001, "volumeMm3": 4048.0 }, "ms": 9292, "name": "T26 a NEGATIVE offset plane keeps the base plane\u0027s axes (asymmetric sketch, separate body)", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5630, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 5.0, 5.0, 10.0 ], "min": [ -5.0, -5.0, 0.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 968.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 5.0, 10.0 ], "min": [ -5.0, -5.0, 0.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 11 ], "massKg": 0.007744000000000001, "volumeMm3": 968.0 }, "ms": 8112, "name": "T27 an ASYMMETRIC two-way cut: depthMm along the cut\u0027s own direction (-normal), depth2Mm the other way", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5630, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": 1, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4188.495559215387, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 15.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 12 ], "massKg": 0.03350796447372311, "volumeMm3": 4188.496 }, "ms": 10279, "name": "T28 linear pattern with NEGATIVE spacing goes -X (instances stay on the block)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5843, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 1084.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 11 ], "massKg": 0.008672000000000004, "volumeMm3": 1084.0 }, "ms": 7589, "name": "T29 shell removing the BOTTOM face (hidden in an iso view)", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5636, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 772.5167034419759, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 5.0, 10.0, 5.0 ], "min": [ -5.0, 0.0, -5.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 5 ], "massKg": 0.006180133627535808, "volumeMm3": 772.517 }, "ms": 8698, "name": "T30 fillet ONE feature\u0027s edges by allOfFeature on a cylinder (2 circular edges)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5862, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": [ 0, 160, 60 ], "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4000.0, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 0, 160, 60 ], "bboxMm": { "max": [ 10.0, 10.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 1020.0, "faceCount": [ 6 ], "massKg": 0.00408, "volumeMm3": 4000.0 }, "ms": 8647, "name": "T31 a material AFTER an appearance keeps the colour (the bridge re-applies it)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5862, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": null, "bboxMm": null, "bodyBoxes": null, "bodyCount": null, "densityKgM3": null, "faceCount": null, "features": null, "massKg": null, "mustFailOrRemoveMaterial": false, "volumeMm3": 4112.02432634622, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 165, 158, 150 ], "bboxMm": { "max": [ 10.0, 14.0, 10.0 ], "min": [ -10.0, 0.0, -10.0 ] }, "bodyCount": 1, "densityKgM3": 8000.0, "faceCount": [ 9 ], "massKg": 0.03289619461076976, "volumeMm3": 4112.024 }, "ms": 7983, "name": "T32 an op between a sketch and its extrude does not lose the sketch", "pass": true, "reuseFallback": null, "reusedDocument": true, "swPrivateMbAfter": 5664, "verb": "swx_run_script" }, { "expected": { "appearanceRgb": [ 200, 0, 0 ], "bboxMm": { "max": [ 15.9, 11.3, 7.9 ], "min": [ -15.9, 0.0, -7.9 ] }, "bodyBoxes": null, "bodyCount": null, "densityKgM3": 1020.0, "faceCount": null, "features": [ "Boss-Extrude1", "Cut-Extrude1", "Boss-Extrude2", "Boss-Extrude3" ], "massKg": 0.002114828751242136, "mustFailOrRemoveMaterial": false, "volumeMm3": 2073.3615208256233, "zSpanMm": null }, "fails": [ ], "measured": { "appearanceRgb": [ 200, 0, 0 ], "bboxMm": { "max": [ 15.9, 11.3, 7.9 ], "min": [ -15.9, 0.0, -7.9 ] }, "bodyCount": 1, "densityKgM3": 1020.0, "faceCount": [ 39 ], "massKg": 0.0021148287512421367, "volumeMm3": 2073.362 }, "ms": 15306, "name": "T24 the LEGO 2x4 acceptance brick (examples/lego-2x4.json)", "pass": true, "reuseFallback": null, "reusedDocument": false, "swPrivateMbAfter": 5802, "verb": "swx_run_script" }, { "ms": 2214, "name": "new scratch part", "pass": true, "verb": "swx_new_document" }, { "ms": 3875, "name": "issue #2: a script into the bridge\u0027s own part (by path) says bridgeCreatedDocument:true", "pass": true, "verb": "swx_run_script" }, { "error": "swx_design_info: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 347, "name": "design info", "pass": false, "verb": "swx_design_info" }, { "error": "swx_get_parameters: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 329, "name": "parameters", "pass": false, "verb": "swx_get_parameters" }, { "error": "swx_set_parameter: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 933, "name": "set a dimension", "pass": false, "verb": "swx_set_parameter" }, { "error": "swx_export: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 1511, "name": "export a STEP copy", "pass": false, "verb": "swx_export_step" }, { "error": "swx_save: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 898, "name": "save the scratch part", "pass": false, "verb": "swx_save" }, { "error": "swx_close_doc: no open document is titled \u0027Part14-1792088642002.SLDPRT\u0027", "errorCode": "document_not_open", "hostError": null, "ms": 940, "name": "close the scratch part", "pass": false, "verb": "swx_close_doc" }, { "ms": 1007, "name": "re-activate the document that was active before", "pass": true, "verb": "swx_activate_document" } ], "schemaVersion": 1, "solidworks": { "classicYears": [ 2021 ], "edition": "desktop", "launchRoute": "com", "ready": true, "registryYears": [ 2021 ], "running": true, "versionSupport": { "lacks": [ ], "majorVersion": 29, "revision": "29.5.1", "supported": true, "supportedFrom": 2021, "tested": false, "testedOn": [ 2026 ], "year": 2021 } }, "status": "ok", "statusVerb": "swx_status", "success": true, "summary": { "failed": 6, "passed": 44, "seconds": 379.8979022, "skipped": 0, "solidworksRunning": true }, "timeoutSeconds": 1500 }